聚碳酸酯高温热滞留颜色影响分析

利用聚碳酸酯产品在注塑机中长时间高温停留的方法,开展了聚碳酸酯及助剂停留前后黄色指数变化的实验,分析了不同种类助剂对聚碳酸酯热加工后颜色的影响,阐述了色粉在聚碳酸酯热加工中可能导致色差变化的现象及其原因,并对多种助剂与聚碳酸酯的相互作用讲行了分析.     

面向老龄化社会的产品服务系统设计赋能

目的 针对面向老龄化社会的产品及产品服务系统设计,将赋能的设计理念和价值引入其中,探索设计结果提升老年人能动性和参与性的赋能品质,为设计师开展设计赋能实践提供参考.方法 以设计教学中的学生设计方案作为研究材料,邀请设计研究者参与工作坊,对设计结果的赋能属性进行分析,并通过聚类获得类别化的设计属性,产生了能描述赋能品质的属性词汇表.结果 总结了包含5组形容词组的设计赋能品质集,这一集合包含"顺应性"和"激励性"两个面向.结论 研究结果为设计师进行老龄化设计提供了知识参考,有助于提升设计师的赋能意识.揭示了设计赋能充满矛盾性的品质,提出面向老龄化的设计赋能需要在"顺应"和"激励"之间找到平衡.     

Peer-to-peer electricity trading system: smart contracts based proof-of-benefit consensus protocol

Wireless Networks - Nowadays, people trade electricity through centralized companies or organizations which is vulnerable to cyber attacks and incapable of coping with increasing demands from...     

Trimetallic NiFeCr-LDH/MoS2composites as novel electrocatalyst for OER

The development of efficient and stable oxygen evolution reaction (OER) catalysts is an ongoing challenge. In order to solve the problem of low oxygen evolution efficiency of the current OER catalysts, a novel material was synthesized by the incorporation of NiFeCr-LDH and MoS₂, and its structural and electrochemical properties were also investigated. The introduction of MoS₂ improves the electrochemical performance of NiFeCr-LDH. The polarization curve shows that the potential of composite material is only 1.50 V at a current density of 10 mA cm^?2, which is far superior to commercial precious metal catalysts. In addition, the stability experiment shows that the composite material has excellent stability, and the current density has little change after 500 cycles. Furthermore, we found that some metal ions, such as Ni, Cr and Mo, exist in the form of high valence on the surface of NiFeCr-LDH@MoS₂, which is also conducive to the occurrence of oxygen evolution reaction.     

宰前倒挂应激对鸭血凝胶特性的影响

宰前倒挂因能有效提高屠宰效率成为肉鸭宰杀前必经的一个工艺过程，但倒挂往往会加剧肉鸭的应激程度，影响其血液品质，已成为工厂生产中亟待解决的问题。因此，本实验旨在借助血液学与凝血相关指标探究宰前倒挂应激对鸭血凝胶特性的影响。在屠宰前，将40 只樱桃谷鸭随机分为2 个处理组：对照组和宰前倒挂组（宰前倒挂2.5 min），屠宰后采集血样并制备血凝块，随后分析血液指标（应激指标、血液学指标、凝血指标）以及鸭血凝胶特性。结果表明，宰前倒挂组鸭血中皮质酮激素及促肾上腺皮质激素的水平均高于对照组，说明实验所建立宰前倒挂模型成立。倒挂应激后，红细胞计数、血小板计数、血红蛋白质量浓度增加，红细胞比容、平均红细胞体积及平均血小板体积增大；凝血酶原的水平极显著上升（P＜0.01），组织因子的水平显著上升（P＜0.05）。宰前倒挂最终导致鸭血凝胶化加快，鸭血凝胶体系中水分迁移速率增大，结合水与自由水比例减少，不易流动水比例增大，质构特性和保水性变差。研究揭示了宰前倒挂应激通过影响鸭血的血液学指标和凝血系统从而改变其凝胶行为及凝胶特性，可为工厂改善应激对鸭血凝胶品质的影响提供理论依据。     

Zinc ferrite based gas sensors: A review

Flammable, explosive and toxic gases, such as hydrogen, hydrogen sulfide and volatile organic compounds vapor, are major threats to the ecological environment safety and human health. Among the available technologies, gas sensing is a vital component, and has been widely studied in literature for early detection and warning. As a metal oxide semiconductor, zinc ferrite (ZnFe₂O₄) represents a kind of promising gas sensing material with a spinel structure, which also shows a fine gas sensing performance to reducing gases. Due to its great potentials and widespread applications, this article is intended to provide a review on the latest development in zinc ferrite based gas sensors. We first discuss the general gas sensing mechanism of ZnFe₂O₄ sensor. This is followed by a review of the recent progress about zinc ferrite based gas sensors from several aspects: different micro-morphology, element doping and heterostructure materials. In the end, we propose that combining ZnFe₂O₄ which provides unique microstructure (such as the multi-layer porous shells hollow structure), with the semiconductors such as graphene, which provide excellent physical properties. It is expected that the mentioned composites contribute to improving selectivity, long-term stability, and other sensing performance of sensors at room or low temperature.     

耦合双涵道风机的双擎换热系统设计优化

基于航空领域双涵道设计的风机系统,应用于房间空调器,解决单一类型风机存在的风感问题,能有效提升人体舒适性.但耦合双涵道风机的双擎换热系统设计,国内外尚无相关研究.为了研究双擎换热系统匹配设计方法,总结设计规律,通过对耦合双涵道风机的换热系统进行数值仿真和实验研究,获取不同负载条件下,双涵道风机系统上下风机最佳转速配比参数,同时匹配全新换热器结构参数,规划管内侧制冷剂分布,强化双擎换热系统换热效率,提升空调器的能效等级,以满足高能效的用户需求.     

离子色谱-电导法检测酱油中氯化钠的含量

该研究采用灰化预处理+离子色谱-电导法检测酱油中食盐的含量，并与莫尔法、电位滴定法进行比较。结果表明，莫尔法存在滴定过量问题，电位滴定法对温度等外界环境条件和仪器操作要求苛刻，而离子色谱-电导法具有操作简便快速并具有较好的准确度和精密度。实验结果表明，氯化钠含量处于11.56～11.61 g/100 mL之间，回收率实验结果为96.00%～102.10%，相对标准偏差为0.089%。干扰实验对结果无明显影响，且能同时测定多种离子，可用于成品酱油中氯化钠含量的检验。     

Modification of narrow‐spectrum peptidomimetic polyurethanes with fatty acid chains confers broad‐spectrum antibacterial activity

Each year, thousands of patients die from antimicrobial‐resistant bacterial infections that fail to respond to conventional antibiotic treatment. Antimicrobial polymers are a promising new method of combating antibiotic‐resistant bacterial infections. We have previously reported the synthesis of a series of narrow‐spectrum peptidomimetic antimicrobial polyurethanes that are effective against Gram‐negative bacteria, such as Escherichia coli; however, these polymers are not effective against Gram‐positive bacteria, such as Staphylococcus aureus. With the aim of understanding the correlation between chemical structure and antibacterial activity, we have subsequently developed three structural variants of these antimicrobial polyurethanes using post‐polymerization modification with decanoic acid and oleic acid. Our results show that such modifications converted the narrow‐spectrum antibacterial activity of these polymers into broad‐spectrum activity against Gram‐positive species such as S. aureus, however, also increasing their toxicity to mammalian cells. Mechanistic studies of bacterial membrane disruption illustrate the differences in antibacterial action between the various polymers. The results demonstrate the challenge of balancing antimicrobial activity and mammalian cell compatibility in the design of antimicrobial polymer compositions. © 2019 Society of Chemical Industry     

Performance investigation on a novel 3D wave flow channel design for PEMFC

Flow field structure can largely determine the output performance of Polymer electrolyte membrane fuel cell. Excellent channel configuration accelerates electrochemical reactions in the catalytic layer, effectively avoiding flooding on the cathode side. In present study, a three-dimensional, multi-phase model of PEMFC with a 3D wave flow channel is established. CFD method is applied to optimize the geometry constructions of three-dimensional wave flow channels. The results reveal that 3D wave flow channel is overall better than straight channel in promoting reactant gases transport, removing liquid water accumulated in microporous layer and avoiding thermal stress concentration in the membrane. Moreover, results show the optimal flow channel minimum depth and wave length of the 3D wave flow channel are 0.45 mm and 2 mm, respectively. Due to the periodic geometric characteristics of the wave channel, the convective mass transfer is introduced, improving gas flow rate in through-plane direction. Furthermore, when the cell output voltage is 0.4 V, the current density in the novel channel is 23.8% higher than that of conventional channel.